Export iOS project doesn't build on Xcode 5.1 and iOS7.1 SDK.

Comments

• ar2rsawseen Maintainer

  March 2014

  Could it be something like this:
  http://blog.giderosmobile.com/post/68378513314/problems-with-xcode-paths-fix

  http://appcodingeasy.com/Gideros-Mobile

  +1 -1Share on Facebook
• eezing Member

  March 2014 edited March 2014

  Fully updated on iOS, Mavericks and Xcode... build is working fine.
  
  @Chang, try selecting a real device (not a simulator) in Xcode at the top left of the window before building.

  http://www.ezinterweb.com

  +1 -1Share on Facebook
• Chang Member

  March 2014

  @ar2rsawseen No its not that.
  
  @eezing I'm on Mountain Lion, not sure if upgrade to mavericks will solve the issue. I selected a real device - iPhone 5S with iOS7.1.

  

  

  Screen Shot 2014-03-12 at 1.47.59 AM.png

  1280 x 800 - 538K

  Screen Shot 2014-03-12 at 1.47.59 AM.png 537.7K

  +1 -1Share on Facebook
• ar2rsawseen Maintainer

  March 2014

  @Chang it seems you've mixed old gideros lib with new gideros project, where there should be gideros lib and lua lib separated.
  Try doing a full reexport.

  http://appcodingeasy.com/Gideros-Mobile

  +1 -1Share on Facebook
• Chang Member

  March 2014

  @ar2rsawseen I did reexport, and I also see liblua.a and libgideros.a in the project folder. Never had this issue before until I upgrade to the new Xcode.

  +1 -1Share on Facebook
• Chang Member

  March 2014

  Upgraded to Mavericks but doesn't help. I think it failed to link the Lua lib.
  
  

  

  

  Screen Shot 2014-03-12 at 12.41.20 PM.png

  1280 x 800 - 463K

  Screen Shot 2014-03-12 at 12.41.20 PM.png 462.7K

  +1 -1Share on Facebook
• Chang Member

  March 2014

  @ar2rsawseen I think I found the problem, Xcode force running arm64 on device (iPhone 5S) and iPhone Retina (64-bit) simulator.
  
  Build on:
  iPhone Simulator (non 64-Bit) - Success
  iPhone Simulator (64-Bit) - Fail
  iPhone 5S running iOS7.1 - Fail

  +1 -1Share on Facebook
• eezing Member

  March 2014

  Yep, arm64 issue.
  
  Fix:
  
  In Xcode > Target > Build Settings > Architectures > Valid Architectures:
  
  Remove arm64 value. Values should be: armv7 armv7s
  
  App runs OK on iPad mini, iPhone 5, iPhone 5s
  
  

  http://www.ezinterweb.com

  +1 -1Share on Facebook
• Chang Member

  March 2014

  A solution for this is to make some changes in build settings:
  
  1) Change Architectures from "Standard Architectures (armv7, armv7s, arm64)" to "ARCHS = armv7 armv7s"
  2) Change Build Active Architectures Only to "No"
  3) Keep existing Valid Architectures as "arm64 armv7 armv7s" so that it works on 64-bit iPhone too.

  +1 -1Share on Facebook
• Chang Member

  March 2014

  @eezing Yes, just found this fix too!

  +1 -1Share on Facebook
• ar2rsawseen Maintainer

  March 2014

  Included in FAQ
  http://members.giderosmobile.com/knowledgebase.php?action=displayarticle&id=94

  http://appcodingeasy.com/Gideros-Mobile

  +1 -1Share on Facebook
• eezing Member

  March 2014

  @Chang
  
  Removing arm64 from Valid Architectures does't appear to break functionality on iPhone 5s... but your way seems safer so I'll go with that. Thanks!
  

  http://www.ezinterweb.com

  +1 -1Share on Facebook
• boriskey Member

  September 2014

  Included in FAQ
  http://members.giderosmobile.com/knowledgebase.php?action=displayarticle&id=94

  btw this link does not work anymore
  
  

  +1 -1Share on Facebook